What kind of care is there in maintenance of the rotary dehumidifier?

Time:2021/8/25 15:58:31

Rotary dehumidifiers are mainly used in underground buildings, pharmaceutical factories, food processing, operating rooms, etc., and work in conjunction with air conditioning systems to achieve the required temperature and humidity. So what are the maintenance aspects of the rotary dehumidifier? Next, let the editor of the rotary dehumidifier explain this, I hope it can be helpful to everyone, the specific content is as follows:

1. The air inlet and outlet of the rotary dehumidifier must not be blocked by obstacles, and the air filter must be cleaned.

2. The rotary dehumidifier should be placed in the center of the room.

3. The condenser must be cleaned frequently and kept clean.

4. If the air humidity is lower than 30%, it will appear too dry and uncomfortable, so a reliable humidity controller can be controlled within the range of 50% to 60%. Close doors and windows when in use to achieve the purpose of indoor dehumidification. The machine body must be level and must not be tilted or lowered to avoid damage to the machine or abnormal noise.

5. When the ambient temperature is lower than 15°C, the water droplets attached to the surface of the evaporator will freeze, weakening the effect of the desiccant. If the ambient temperature exceeds 40°C, the pressure in the system will increase, and the compressor will be overloaded. The protector must cut off the circuit, otherwise the compressor motor will be damaged. Therefore, the suitable temperature range of the rotary dehumidifier is 15-40°C.

6. The water storage tank of the rotary dehumidifier is too full. To avoid overfilling and soil contamination, when you need to move the case during operation, please unplug the power cord first, and then drain the water in the water storage bucket.

7. The rotary dehumidifier cleans the air filter regularly (about once every two weeks) to maintain the efficiency of dehumidification and dust removal and the life of the machine. Clean the air filter, rinse it with water below 40℃, and use detergent as much as possible. After washing off the dust, rinse it with water, dry it in a cool place, and put it back in the box. When cleaning the casing, wipe it gently with a damp cloth; avoid direct spraying of clean water to avoid damage to the electrical insulation. The adhesive on the surface of the body can be washed off with soap and water. Avoid spraying gasoline, gasoline, thinner or aerosol pesticides to avoid peeling or discoloration of the paint. Do not use thin rods or iron wires to dig out the inside of the machine to avoid malfunction or danger.

8. After removing the dehumidifier, let it stand as far as possible for four to six hours before turning it on again. Since the compressor pipeline in the rotary dehumidifier contains cold coal, it takes four to six hours to return to the position after moving the rotary dehumidifier.

9. Unplug the power cord, or when not in use for a long time, or when traveling, please unplug the power cord to extend the service life of the machine.

The above nine points are all about the exquisite maintenance of the rotary dehumidifier. Thank you for your understanding and support!